Evolution of Aluminium-Tin Multi Material Drilling Process on Bench Press Drill Machine
DOI:
https://doi.org/10.32628/IJSRMMEKeywords:
Bench Press Drill Machine, Multi Material, Drilling Process, Aluminum Tin, Drill BitsAbstract
The evolution of the aluminium-tin multi-material drilling process on a bench press drill machine has been a crucial area of research aimed at enhancing drilling efficiency and quality in heterogeneous material stacks. This study investigates the optimization of drilling parameters such as cutting speed, feed rate, and drill bit geometry to achieve improved tool life and hole quality while drilling aluminium-tin composites. Experimental methodologies involving various combinations of these parameters have been employed to analyze their effects on drilling forces, surface roughness, and burr formation. The findings contribute to a deeper understanding of the drilling behavior of aluminium-tin multi-materials and provide insights into the development of strategies for optimizing drilling processes on bench press drill machines, thereby advancing manufacturing capabilities in industries requiring precision drilling of composite material give a comprehensive understanding of the art in multi-material drilling of aluminum-tin plates, offering insights into future research directions and industrial applications in aerospace, automotive, and other high-performance sectors.
References
J.J. Pengra, “Study of the influence of hole quality on composite materials”, Lockheed-California company, NASA CR-159257, February 1980
I.R. Farrow, J.Lee, C.D. Kong, “ FLEXURAL TESTING OF COMPOSITE LAMINATESFOR DRILLING TRIAL ASSESSMENT”, Advanced Composites, lettersVol.9, No.4, 2000
Scott F. Miller, Peter J. Blau, Albert J. Shih, “Tool wear in friction drilling”, International Journal of Machine Tools & Manufacture 47 (2007) 1636–1645
M. A. Azmir, Praveena Nair Sivasankaran, Z. Hamedon, “Experimental Study on Drilling Process of CFRP Composite Laminate”, Materials Science Forum vols. 638-642 (2010) pp 927-932.Doi:10.4028/www.scientific.net/MSF.638-642.927
Redouane Zitoune , Vijayan Krishnaraj, Francis Collombet, “Study of drilling of composite material and aluminium stack”, Composite Structures 92 (2010) 1246–1255, Doi:10.1016/j.compstruct.2009.10.010
Chung-Chen Tsao, “Effects of Passive backup Force on Delamination in Drilling Composite materials Using Twist Drill”, Advanced Materials Research Vols. 479-481 (2012) pp 213-216,Doi:10.4028/www.scientific.net/AMR.479-481.213
I. Paul Theophilus Rajakumar , P. Hariharan, L. Vijayaraghavan, “Drilling of carbon fibre reinforced plastic (CFRP) composites – a review”, Int. J. Materials and Product Technology, Vol. 43, Nos. 1/2/3/4, 2012
Navid Zarif Karimi, Hossein Heidary, Giangiacomo Minak, Mehdi Ahmadi, “Effect of the drilling process on the compression behaviour of glass/epoxy Laminates”, Composite Structures 98 (2013) 59–68
Patil A.A., Shende M.D., “Experimental and Analytical Investigation of Drilling of sandwich Composites: A Review”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), volume 6, Issue 6 (May. – Jun. 2013), PP 40-50
Latif Ozler, Nilufer Dogru, “An Experimental Investigation of Hole Geometry in friction Drilling”, Materials and Manufacturing Processes, 28: 470–475, 2013,DOI: 10.1080/10426914.2012.746699
R.Balaji, C.Sivakandhan, P.Munusamy, D.muthukumar, “Experimental Study of Mechanical Properties and Drilling properties of Glass Fibre Composite”, Journal of Engineering Research and Application, Vol. 7, Issue 1, ( Part -3) january 2017, pp.24-30, DOI: 10.9790/9622-0701032430
Mahadi Hasan,Jingwei Zhao, Zhengyi Jiang, “A review of modern advancements in micro drilling techniques”,Journal of Manufacturing Processes, 2017, 29 343-375
Mathew Alphonse, V.K.Bupesh Raja, K.Logesh, N.MuruguNachippan, “Evolution and Recent Trends in Friction Drilling Technique and the Application of Thermography”, Materials Science and Engineering 197 (2017) 012058 Doi:10.1088/1757-899X/197/1/012058
Maojunn Li, Sein Leung Soo, David K. Aspinwall, David Pearson, Wayne Leahy, “Study on tool wear and workpiece surface integrity following drilling of CFRP laminates with variable feed rate strategy”, Procedia CIRP 71 (2018) 407-412, DOI 10.1016/j.procir.2018.05.055
Pranav Kumar Saraswati, Saritprava Sahoo, Sarada Prasad Parida, Pankaj Charan Jena, “Fabrication, Characterization and Drilling operation of Natural Fiber Reinforced Hybrid composite With Filler (Fly-Ash/Graphene)”,International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075 (Online), Volume-8 Issue-10, August 2019,DOI:10.35940/ijitee.J1253.0881019
Ferit Ficici, “ Evaluation of surface roughness in drilling particle-reinforced Composites”, Advanced Composites Letters, Volume 29: 1–11 , 2020 DOI:10.1177/2633366X2093771
Cristiano Devitte, Gabriel S. C. Souza, André J. Souza, and Volnei Tita,“Optimization for drilling process of metal-Composite aeronautical Structures”,Science and Engineering of Composite Materials 2021; 28: 264–275
S Senthil Babu, C Dhanasekaran, G Anbuchezhiyan and Kumaran Palani, “Parametric analysis on drilling of aluminium alloy hybrid composites reinforced With SIC/WC”, Eng. Res. Express 4 (2022) 025036 https://doi.org/10.1088/2631-8695/ac7038
Jayavelu Udaya Prakash, Charles Sarala Rubi, Sivaprakasam Palani,Sunder Jebarose Juliyana And Arasumugam Divya Sadhana, “ Optimization Of machining parameters in drilling of LM6/B4C/Fly ash hybrid composites” ,Manufacturing Rev. 9, 28 (2022), https://doi.org/10.1051/mfreview/2022026
Sunder Jebarose Juliyana, Jayavelu Udaya Prakash, robert Cep and Krishnasamy Karthik, “ Multi-Objective Optimization of Machining Parameters For drilling LM5/ZrO2 Composites Using Grey Relational Analysis”, Materials 2023, 16, 3615. https://doi.org/10.3390/ma16103615
Amr Seif, A. Fathy & A.A. Megahed, “Efect of drilling process parameters on Bearing strength of glass fber/aluminum mesh reinforced epoxy composites”,Scientifc Reports | (2023) 13:12143, https://doi.org/10.1038/s41598-023-39097-3
Jiali Yu , Tao Chen and Yiming Zhao, “Study on Optimization of Drilling Parameters for Laminated Composite Materials”, Materials 2023, 16, 1796. https://doi.org/10.3390/ma16051796
Tanzila Nargis, S. M. Shahabaz, Subash Acharya, Nagaraja Shetty, Rashmi Laxmikant Malghan and S. Divakara Shetty, “ A Comprehensive Study on the Optimization of Drilling performance in Hybrid Nano-Composites and Neat CFRP Composites Using Statistical and Machine Learning Approaches”,J.Manuf. Mater. Process. 2024, 8, 67. https://doi.org/10.3390/jmmp8020067
