Optimization of Process Parameters of TIG Welding using Taguchi Approach : A Review
DOI:
https://doi.org/10.32628/IJSRMMEKeywords:
Aluminum Alloy, Tungsten Inert Gas Welding, Taguchi ApproachAbstract
High speed strength and corrosion resistance make Aluminum Alloy very prominent in Aerospace industry apart from automobile industry. In fact Aerospace is more predominant area, hence processing of this alloy more importance in aerospace. Aluminum in its pure form suffers from poor strength and other mechanical properties. Apart from automobile components i.e. aerospace the major structure of an air craft is an Aluminum Alloy Al-65032.Today, Tungsten Inert Gas (TIG) Welding recommended welding for Aluminum alloys. Both are multi-objective and multi-factor metal fabrication techniques. The main objective of this work is to achieve the best mechanical properties. So, therefore the Taguchi approach and Design of Experiments (DOE) approaches have been chosen to carry out this work.
References
Y. S. Tarng, W. H. Yang and S. C. Juang, “The use of fuzzy logic in the Taguchi method for the optimisation of the submerged arc welding process”, The International Journal of Advanced Manufacturing Technology, vol. 16, no. 9, pp. 688-694, 2000.
Zhang Y.M, Pan C and Male A.T, “Welding of austenitic stainless steel using a double-sided arc welding process”, Material Science and Technology, 2001, 17(10): 1280–1284.
Juang S.C and Tarang Y.S, “Process Parameter Selection for Optimizing the Weld Pool Geometry in the TIG Welding of Stainless Steel”, Journal of Material Process Technology, 2002, 122: pp 33.
Ahmet Durgutlu: Experimental Investigations of the effect of Hydrogen in Argon as a shielding gas on TIG Welding of austenitic stainless steel, 'Materials & Design' Vol.25, 2004,pp.l9-23.
Praveen. P: Meeting Challenges in welding of Al-alloys through pulse gas metal arc welding, 'Journal of Material Processing Technology', Vol 164-165, (2005) pp.1106-1112.
D. Mahto; Anjani Kumar: Optimization of Process Parameters in Vertical CNC Mill Machines Using Taguchi's Design of Experiments,'ARISER'2008, vol.4 no.2, pp.61-75.
Kumar.A, Sounderrajan.S: Optimization of pulse TIG welding process parameters on mechanical properties of AA5456 Al alloy weldments, 'Materials and Designs', Vol.30, 2009, pp.l288-1297.
Ugur Esme; Sueda Ozgun: Optimization of Weld Bead Geometry In TIG Welding Process Using Grey Relation Analysis and Taguchi. Method, 'Materials and technology1 vol. 43, no.3, 2009, pp.143-149.
J. Yan, M. Gao and X. Zeng, “Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding”, Optics and Lasers in Engineering vol. 48, no. 4, pp. 512–517, 2010.
Zhao, J., Jiang, F., Jian, H., Wen, K., Jiang, L. and Chen, X., 2010. Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al–Mg–Sc alloy plates. Materials & Design, 31(1), pp.306-311.
Nikseresht, Z., Karimzadeh, F., Golozar, M.A. and Heidarbeigy, M., 2010. Effect of heat treatment on microstructure and corrosion behavior of Al6061 alloy weldment. Materials & Design (1980-2015), 31(5), pp.2643-2648.
T. Sakthivel, M. Vasudevan, K. Laha, P. Parameswaran, K. S. Chandravathi, M. D. Mathew and A. K. Bhaduri, “Comparison of creep rupture behaviour of type 316L(N) austenitic stainless steel Joints welded by TIG and activated TIG welding processes”, Materials Science and Engineering: A, vol. 528, no. 22-23, pp. 6971- 6980, 2011.
Costa, J.D., Ferreira, J.A.M., Borrego, L.P. and Abreu, L.P., 2012. Fatigue behaviour of AA6082 friction stir welds under variable loadings. International Journal of Fatigue, 37, pp.8-16.
Dongjie Li, Shanping Lu, Wenchao Dong, Dianzhong Li & Yiyi Li 2012, Study of the law between the weld pool shape variations with the welding parameters under two TIG processes, Journal of Materials Processing Technology, vol. 212, pp. 128-136.
Lakshman Singh, Vinay Shah & Naveen K Singh 2013, Study The Influence of TIG Welding Parameters On Weld Characteristics Of 5083 Aluminum Alloy, International Journal of Engineering Science and Innovative Technology (IJESIT), vol. 2, Issue 5, pp. 462-468.
K. R. Buddu, N. Chauhan and P. M. Raole, “Mechanical properties and microstructural investigations of TIG welded 40 mm and 60 mm thick SS 316L samples for fusion reactor vacuum vessel applications”, Fusion Engineering and Design, vol. 89, no.12, pp. 3149–3158, 2014.
Y. Zou, R. Ueji and H. Fujii, “Mechanical properties of advanced active-TIG welded duplex stainless steel and ferrite steel”, Material Science and Engineering: A, vol. 620, pp. 140–148, 2015.
Sun, J., Huang, J., Yan, Q. and Li, Z., 2016. Fiber laser butt joining of aluminum to steel using welding-brazing method. The International Journal of Advanced Manufacturing Technology, 85(9), pp.2639-2650.
Anand, R. and Padmanabhan, R., 2022. Interlock Friction Stir Weld of Dissimilar Aluminum Alloys AA 7075 T6-AA7475 T7 Using a Novel Asymmetric Dual-Pin Tool: Mechanical Properties and Microstructure Characterization. Metallography, Microstructure, and Analysis, pp.1-9.
A. Balaram Naik, A. Chennakeshava Reddy , “ Optimization of tensile strength in TIG welding using the Taguchi method and analysis of variance (ANOVA) ”, Thermal Science and Engineering Progress; Volume 8, December 2018, Pages 327-339.
P.K. Jayashree, S.S. Sharma, Raviraj Shetty, Ashish Mahato, M.C. Gowrishankar, “Optimization of TIG welding parameters for 6061Al alloy using Taguchi’s design of experiments”, Materials today proceedings; Volume 5, Issue 11, Part 3, 2018, Pages 23648-23655.
V. Mohanavel , M. Ravichandran , S. Suresh Kumar , “ Optimization of tungsten inert gas welding parameters to: attain maximum impact strength in AA6061 alloy joints using Taguchi Technique ”, Materials today proceedings; Volume 5, Issue 11, Part 3, 2018, Pages 25112-25120.
G. Shanmugasundar, B. Karthikeyan, P.Santhosh Ponvell, V. Vignesh , “ Optimization of Process Parameters in TIG Welded Joints of AISI 304L -Austenitic Stainless Steel using Taguchi’s Experimental Design Method”, Materials today proceedings; Volume 16, Part 2, 2019, Pages 1188-1195.
J. Sivakumar, K. N. Naik, “ Optimization of weldment in bead on plate welding of nickel based super alloy using Activated flux tungsten inert gas welding (A-TIG)”, Materials today proceedings; Volume 27, Part 3, 2020, Pages 2718-2723.
Kajal,G, Lamba, R. Himanshu Garg, Pratibha Malik,“ An experimental investigation of gas tungsten arc welding aspects on stainless steel (SS304) using Taguchi method”, Materials today proceedings; DOI:10.1016/j.matpr.2023.07.072 Corpus ID: 259942661.
