A Review Paper on Friction Welding Process Parameters on Identical Materials Are Experimentally Evaluated and Using Optimization Technique
Keywords:
Friction welding, upset pressure, rotating speed, centre lathe, Taguchi methodAbstract
In fabrication industry, joining processes play a very important role. Among various joining processes, welding process has more strength as compared to other joining processes. Friction welding is a solid state welding, which is used to join similar or dissimilar materials by applying pressure and without the need of filler materials for heat production. Also, friction welded joints can produce welds that are superior in strength of the parent material. Friction welding enables similar or dissimilar materials to be joined together by sliding one material against the other under pressure. Friction welding process includes upset time, upset pressure, and heating time, heating pressure and rotating speed. In this experimental work, friction joints are carried out by centre lathe machine. In this experimental work, various types of metal joining were made using by using friction welding machine, welding of similar materials are done using the input process parameters like spindle speed, heating pressure, upset time, upset pressure, heating time, material to be welded, component size and configuration based on the literature review. Then the welded joints are tested to study and analyse the mechanical properties like axial shortening, hardness and impact strength to get the improved quality of welded joints and to optimize the process parameters using Taguchi method.
References
Divagar, SR & Muthu Kumaran, M 2015, ‘Joining the different materials using friction welding - A review’, International Journal of Mechanical Engineering and Robotics Research, vol. 4, pp. 117-122.
Jagroop Singh & Karamdeep Singh 2014, ‘Fabrication of friction welding on centre lathe: A Case Study’, International Journal of Research in Mechanical Engineering & Technology, vol. 4, no. 2, pp. 145-147.
Kimura, M, Suzuki, K, Kusaka, M & Kaizu, K 2017, ‘Effect of friction welding condition on joining phenomena, tensile strength, and bend ductility of friction welded joint between pure aluminium and AISI 304 stainless steel’, Journal of Manufacturing Processes, vol. 25, pp. 116-125.
Shanjeevi, C, Satish kumar, S & Sathiya, P 2013, ‘Evaluation of mechanical and metallurgical properties of dissimilar materials by friction welding’, Procedia Engineering, vol. 64, pp. 1514-1523.
Furkan Sarsilmaz, Ihsan Kirik & Serkan Bati 2017, ‘Microstructure and Mechanical Properties of Armor 500/AISI2205 steel joint by friction welding.’ Journals of manufacturing process. vol. 28, pp. 131-136.
Jeswin Alphy James & Sudhish, R 2016, ‘Study on Effect of Interlayer in Friction Welding for Dissimilar Steels: SS304 and AISI 1040’, Procedia Technology, vol. 25, pp. 1191-1198.
Xun Li, Jinglong Li, Zhongxiang Liao, Feng Jin, Fusheng Zhang & Jiangtao Xiong 2016, ‘Microstructure evolution and mechanical properties of rotary friction welded TC4/SUS321 joints at various rotation speeds’, Materials and Design, vol.7, pp. 1264-1275.
Paventhan, R, Lakshminarayanan, PR & Balasubramanian, V 2012, ‘Optimization of Friction Welding Process Parameters for Joining Carbon Steel and Stainless Steel’, Journal of Iron and Steel Research, International, vol. 19, no. 1, pp. 66-71.
Kimura, M, Suzuki, K, Kusaka, M & Kaizu, K 2017, ‘Effect of friction welding condition of joining phenomena and mechanical properties of friction welded joint between 6063 aluminum alloy and AISI 304 stainless steel’, Journal of Manufacturing Processes, vol. 26, pp. 178-187.
Arivazhagan, N, Senthilkumaran, K, Narayanan, S, Devendranath Ramkumar, K, Surendra, S & Prakash, S 2012, ‘Hot Corrosion Behavior of Friction Welded AISI 4140 and AISI 304 in K2SO–60% NaCl Mixture’, Journal of Material Science Technology’, vol. 28, no. 10, pp. 895-904.
Tomoki Matsuda, Hironobu Adachi, Tomokazu Sano, Ryo Yoshida, Hisashi Hori, Shozo Ono & Akio Hirose 2019, ‘High-frequency linear friction welding of aluminum alloy to stainless steel’, Journal of Materials processing Technology, vol. 269, pp. 45-51.
Krishan Kumar & Nitesh Jain 2020, ‘Microscopic Behavior of Friction Welding of Aluminium 6061and Stainless Steel-316’, International Journal of Advances in Engineering and Management, vol. 2, no. 5, pp. 556-562.
Kimura, M, Ohara, K, Kusaka, M, Kaizu, K & Hayashida, K 2020, ‘Effects of tensile strength on friction welding condition and weld faying surface properties of friction welded joints between pure copper and austenitic stainless steel’, Journal of Advanced Joining Processes, vol. 2, pp. 1-11.
Vivekananthan, M, Saravanakumar, M, Nimel Sworna Ross, K, Solai Senthil Kumar, K, & Steephun Raj, F 2021, ‘Experimental investigation of Mechanical properties in friction welding parameters for dis-similar metals, SS-304 & SS-410’, Materials Today: Proceedings, vol. 37, no. 2, pp. 3683-3688.
Hussein Mesmari & Fawzia Krayem 2013, ‘Mechanical and Microstructure Properties of 304 Stainless Steel Friction Welded Joint’, International Research Journal of Engineering Science, Technology and Innovation, vol. 2, no. 4, pp. 65-74.
Amit Handa & Vikas Chawla 2014, ‘Investigation of mechanical properties of friction welded AISI 304 with AISI 1021 dissimilar steels’, International Journal of Advanced Manufacturing Technology, vol. 75, pp. 1493-1500.
Palanivel, R, Laubscher, RF, Dinaharan, I & Hattingh, DG 2017, ‘Microstructure and Mechanical Characterisation of Continuous Drive Friction Welded Grade 2 Seamless Titanium Tubes at Different Rotational Speeds’, International Journal of Pressure Vessels and Piping, vol. 154, pp. 17-28.
Shailesh, K, Singh, Chattopadhyay, K, Phanikumar, G & Dutta, P 2014, ‘Experimental and numerical studies on friction welding of thixocast A356 Aluminium alloy’, Acta Materialia, vol. 73, pp. 177-185.
Damodaram, R, Ganesh Sundara Raman, S & Prasad Rao, K 2013, ‘Microstructure and mechanical properties of friction welded alloy 718’, Materials Science and Engineering A, vol. 560, pp. 781-786.
Radoslaw Winiczenko & Mieczyslaw Kaczorowski 2012, ‘Friction welding of ductile cast iron using interlayers’, Materials and Design, vol. 34, pp. 444-451.
Kumar Gaurav & Sunil Kumar 2016, ‘Study on Mechanical Properties of Aluminum Alloy AA 6351-T6 using TIG Welding’, International Journal of Engineering and Management Research, vol. 6, no. 2, pp. 818-826.
Zhida Liang, Guoliang Qin, Peihao Geng, Fan Yang & Xiangmeng Meng 2017, ‘Continuous drive friction welding of 5A33 Al alloy to AZ31B Mg alloy’, Journal Manufacturing Processes, vol. 25, pp. 153-162.
Meisnar, M, Baker, S, Bennett, JM, Bernard, A, Mostaf, Resch, S, Fernandes, N & Norman, A 2017, ‘Microstructural characterisation of rotary friction welded AA6082 and Ti-6Al-4V dissimilar joints’, Materials and Design, vol. 132, pp. 188-197.
Berna Balta, Armagan Arici, A & Muharrem Yilmaz 2016, ‘Optimization of process parameters for friction weld steel tube to forging joints’, Materials and Design, vol. 103, pp. 209-222.
Wenya Li, Juandi Suo, Tiejun Ma, Yan Feng & KeeHyun Kim 2014, ‘Abnormal microstructure in the weld zone of linear friction welded Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy joint and its influence on joint properties’, Materials Science and Engineering A, vol. 599, pp. 38-45.
Xinyu Wang, Wenya Li, Tiejun Ma, Xiawei Yang & Achilles Vairis 2019, ‘Effect of welding parameters on the microstructure and mechanical properties of linear friction welded Ti-6.5Al-3.5 Mo-15Zr-0.3Si joints,’ Journal of Manufacturing Processes, vol. 46, pp. 100-108.
Anthony, R, McAndrew, Paul, A, Colegrove, Clement Buhr, Bertrand CD, Flipo & Achilles Vairis 2018, ‘A literature review of Ti-6Al-4V linear friction welding’, Progress in Materials Science, vol. 92, pp. 225-257.
Packiaraj Rajendran, T, Rajesh Jesudoss Hynes, N, Maria, P, Nikolova, Christopher, T, & Danail Nikolov, 2020, ‘Influence of heat treatment on friction welded joints made of high-carbon high-chromium tool steel/low-carbon steel for tooling applications’, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 42, no. 87, pp. 1-13.
Singh, R, Kumar, R &Hashmi , MSJ 2017, ‘Friction welding of dissimilar plastic based material by metal powder reinforcement’,Reference Module in Materials Science and Materials Engineering,doi:10.1016/B978-0-12-803581-8.04159-X.
Pandiarajan, S, Senthil Kumaran, S & Kumaraswamidhas, LA 2016, ‘Investigation on SA213 tube to SA387 tube plate with backing black arrangement in friction welding process’, Alexandria Engineering Journal, vol. 55, no. 2, pp. 1187-1199.
