Examination of Modulus of Rupture of Fibre mat Bonded with Potential Adhesives

Authors

  • Lokesh K S  Assistant professor, Department of Mechanical Engineering, Srinivas Institute of Technology, Volachil, Mangalore, Karnataka, India
  • Dr. Thomas Pinto  Professor & Head, Department of Mechanical Engineering, Srinivas Institute of Technology, Volachil, Mangalore, Karnataka, India

Keywords:

Rupture Strength, Fibrous Composites.

Abstract

Composites made up of synthetic fibre mats are strongly recommended to various structural applications due to its excellent load resistance and light weight comparably to metals directing to replace the conventional materials for potential applications. In addition to this, the glass fiber reinforced epoxy composites, like any other fiber reinforced polymer composites, offer many advantages over the conventional structural materials due to their excellent resistance against bending. These alternatives plays dignified role in multi disciplinary sections of engineering. The performance of the composites can further be improved by adding fillers to them. The present work aims at using wollastonite as a filler material and this work also includes the experimental evaluation of flexural properties of series of such as wollastonite filled glass-epoxy composites (for both woven and chopped mat type). It was clearly noticed that addition of filler material aims to vary the resistance of material against rupture. As the filler percentage increases which increases the load taking ability of material is clearly recorded and the corresponding values are detailed to examine the rupture resistance of fibre mat bonded with thermo set adhesives.

References

  1. KS Lokesh , Evaluation of Toughness on Varied Thickness of Chopped Strand Mat /PU-foam Sandwich Structures , International Research Journal of Engineering and Technology(IRJET), e-ISSN:2395-0056 Volume: 05 Issue: 09 | September-2018, p-ISSN: 2395-0072
  2. KS Lokesh , Synthesis and Study on Effect of Thickness on 3-point Bending Strength of Sandwich Composites, International Research Journal of Engineering and Technology(IRJET), e-ISSN:2395-0056 Volume: 05 Issue: 08 | August-2018, p-ISSN: 2395-0072
  3. KS Lokesh , Preparation and Tensile strength Evaluation of Synthetic fibers Sandwiched with Foam structures. International Research Journal of Engineering and Technology(IRJET), e-ISSN:2395-0056 Volume: 05 Issue: 09 | September-2018, p-ISSN: 2395-0072
  4. KS Lokesh, T Pinto ,Experimental Study on Effect of Metallic Oxides Mixture on Tribological Behaviour of Aluminium Based Metal Matrix Composites, International Research Journal of Engineering and Technology(IRJET),e-ISSN:2395-0056 Volume: 05 Issue: 06 | June-2018, p-ISSN: 2395-007
  5. Konur O and Mathews F.L," Effects of the properties of the constituents on the fatigue Performance of Composites: A Review", Composites, 20(4), 1989, pp.317-328.
  6. Lokesh K.S, Dr.Thomas Pinto, & Ravi S.M. (2017). Evaluation of Mechanical Properties and Wear Characterization of Polymer Composites under Varying Temperature Conditions: A Review. International Journal of Engineering and Information Systems(IJEAIS),1(4),64–68. http://doi.org/10.5281/zenodo.821168
  7. Lokesh K. S., Bandu Ummaji, Gururaj P., K. Rayappa, Yashavantha J., Effect of Red Mud Particles on Scratch Resistance of Aluminum Based Metal Matrix Composites, American Journal of Aerospace Engineering. Vol. 5, No. 1, 2018,pp. 24-29. doi: 10.11648/j.ajae.20180501.14
  8. Lokesh KS, "Impact of Modified Thickness on Flexural Modulus of PU-Foam /CSM Glass Fabric Sandwich Panels ",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 3, pp. 29-35, July-August 2018.URL :http://ijsrmme.com/IJSRMME182210
  9. Lokesh K S , Karthik B.Y, Avinash C.G, Ganesh Kamath, Samson Lobo, "Experimental Study on Tribological Characteristics of E-waste filled Fibre Reinforced Plastics ", International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2, Issue 1, pp.11-16, .2018URL http://ijsrmme.com/IJSRMME182203
  10. Lokesh K S, Dr.Thomas Pinto, Mohammed Gowspeer, Effect of E-waste Rubber on Wear Behaviour of Glass fibre Reinforced with Epoxy Composites Pages: 20-25 DOI: 10.7324/IJASRE.2018.32624 DOI URL: http://dx.doi.org/10.7324/IJASRE.2018.32624
  11. Lokesh KS, "Study on Processing and Axial loading Conditions of Lightweight Materials ",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 4, pp. 21-27, September-October 2018.URL : http://ijsrmme.com/IJSRMME18347
  12. KS Lokesh, T Pinto , Comparative Study on Axial Loading Conditions and Effect of Mineral Filler on CSM and WF Fibres , International Research Journal of Engineering and Technology(IRJET),e-ISSN:2395-0056 Volume: 05 Issue: 10 | October-2018, p-ISSN: 2395-0072
  13. Lokesh KS, Dr. Thomas Pinto, "Experimental Study on Tensile Effect of Different E-glass Fabric Laminates Reinforced with Potential Adhesives ",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 5, pp. 14-22, November-December 2018.
    URL : http://ijsrmme.com/IJSRMME18253
  14. Lokesh KS, "Evaluation of Flexural Rigidity of PU - foam Cored Sandwich Structures",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 5, pp. 36-42, November-December 2018.
    URL : http://ijsrmme.com/IJSRMME18255
  15. Lokesh K S , "Abrasive Study of ELT Rubber Loaded with Fibre Reinforced Plastics",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 5, pp. 43-48, November-December 2018.
    URL : http://ijsrmme.com/IJSRMME18256
  16. Lokesh KS, Dr.Thomas Pinto, "Review on Tribological Parameters of Fibre Reinforced Plastics Modified with Mineral Fillers ",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 5, pp. 49-56, November-December-2018. URL : http://ijsrmme.com/IJSRMME18257
  17. Lokesh KS , "Mineral Filler Effect on Tensile Parameters of Randomly Oriented and Woven Fabric Plastic Laminates ",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 2 Issue 4, pp. 28-33,September-October2018.
    URL : http://ijsrmme.com/IJSRMME18248
  18.  Lokesh K S, "Experimental Study on Effect of Silicon Carbide and Graphite particles on Mechanical Behaviour of Alluminium-6061 Alloys",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 3 Issue 1, pp. 10-17, January-February 2019. URL : http://ijsrmme.com/IJSRMME19311
  19. Lokesh K S, "Preparation and Mechanical Testing of E-waste Glass Filled Polymer Composites",International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 3 Issue 1, pp. 18-23, January-February 2019.URL : http://ijsrmme.com/IJSRMME19312

IInternational Journal of Scientific Research in Mechanical and Materials Engineering

Downloads

Published

2019-03-30

Issue

Volume 3, Issue 2, March-April-2019

Section

Research Articles

License

Copyright (c) IJSRMME

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Lokesh K S, Dr. Thomas Pinto, " Examination of Modulus of Rupture of Fibre mat Bonded with Potential Adhesives, IInternational Journal of Scientific Research in Mechanical and Materials Engineering(IJSRMME), ISSN : 2456-3307, Volume 3, Issue 2, pp.08-14, March-April-2019.