Design and Fabrication of Automatic Lawn Mower
DOI:
https://doi.org/10.32628/IJSRMME24834Keywords:
Mechanical Lawn Mower, Automatic Lawn Mower, Pneumatic CylindersAbstract
This project is a mechanical lawn mower. This machine has blocks and wheels, in which there are blades that will serve as lawn mowers when push. For the convenience of the user, the handle is fixed to the body and can be adjusted to desired height. Although the mechanical lawn mower was the first version when the lawn mower was created, what is interesting here is that we will create a portable lawn mower suitable for use by housewives or smallholders. One of the problems is the existing machine its generator motor which takes a long time to turn on and using a fuel. Next, the objective of this research is to create a mechanical lawn mower with improve the machine without use fuel. The study of methodology is careful planning throughout this semester. To facilitate the implementation of the final project, the methodology must be set as best as possible. Based on the research findings, it can ease a human burden. This mechanical lawn mower can be folded and stored in an available bag.
References
Sunil Kumar, K., Srinivasamurthy, P.L.”Tensile and Hardness Behavior of RRA Treated Aluminum 7075 Alloy”, Lecture Notes in Mechanical Engineering, 2021, 23, pp. 563–575.
Sunil Kumar, K., Srinivasa Murthy, P.L., “Retrogression and re-aging of AL-7075 microstructure and corrosion behavior characterization”, International Journal of Engineering and Advanced Technology, 2019, 9(1), pp. 4377–4383.
Sunil Kumar, K., Srinivasa Murthy, P.L., “Effect of retrogression and re-aging on fatigue crack growth behavior of Al 7075 Alloy”, International Journal of Innovative Technology and Exploring Engineering, 2019, 8(10), pp. 243–247.
Sunil Kumar, K., Srinivasa Murthy, P.L., “Study on tribological characterization of RRA treated aluminium 7075 alloy”, Journal of Advanced Research in Dynamical and Control Systems, 2019, 11, pp. 560–569.
Kumaraswamy, J., Anil, K.C., Canbay, C.A., N D Shiva Kumar. Electro-Whirling Stir Casting: a Novel Approach for Fabricating Al7075/SiC MMCs with Enhanced Thermal Characteristics. Silicon (2023). https://doi.org/10.1007/s12633-023-02678-y
J. Kumaraswamy, Anil K C, T R Veena, G. Purushotham, Sunil Kumar K, “Investigating the Mechanical Properties of Al 7075 Alloy for Automotive Applications: Synthesis and Analysis” in Scopus indexed EVERGREEN Journal with ISSN: 2189-0420, Vol. 10, Issue 03, pp.1286-1295, September 2023.
J. Kumaraswamy, Anil K C, Mahadeva Reddy, Influence of Particulates on Microstructure, Mechanical and Fractured Behaviour on Al-7075 Alloy composite by FEA, Australian Journal of Mechanical Engineering (Tylor and Francis), (Scopus), Review completed, 2023
Sharan kumar, Akash, Anil K C, Kumaraswamy J, Solid Particle Erosion Performance of Multi-layered Carbide Coatings (WC-SiC-Cr3C2), EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 10, Issue 02, pp 813-819, June 2023. https://doi.org/10.5109/6792833
Anil K C, Kumaraswamy J, Mahadeva Reddy, Mamatha K M, Air Jet Erosion studies on Aluminum - Red Mud Composites using Taguchi Design, EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 10, Issue 01, pp130-138, March 2023. https://doi.org/10.5109/6781059.
J. Kumaraswamy, V. Kumar and G. Purushotham, A review on mechanical and wear properties of ASTM a 494 M grade nickel-based alloy metal matrix composites, Materials Today: Proceedings, Vol 37, 2021, pp 2027–2032, https://doi.org/10.1016/j.matpr.2020.07.499.
K. Jayappa, V. Kumar, and G. G. Purushotham, “Effect of reinforcements on mechanical properties of nickel alloy hybrid metal matrix composites processed by sand mold technique,” Applied Science and Engineering Progress, Vol. 14, no. 1, pp. 44–51, Jan.–Mar. 2021. http://dx.doi.org/10.14416/j.asep.2020.11.001
J. Kumaraswamy, V. Kumar and G. Purushotham, Thermal analysis of nickel alloy/Al2O3/TiO2 hybrid metal matrix composite in automotive engine exhaust valve using FEA method, Journal of Thermal Engineering, Vol. 7, No. 3, March, 2021, pp. 415-428. https://dx.doi.org/10.18186/thermal.882965.
J Kumaraswamy, Vijaya Kumar, G Purushotham, Evaluation of the microstructure and thermal properties of (ASTM A 494 M grade) nickel alloy hybrid metal matrix composites processed by sand mold casting, International Journal of Ambient Energy, Vol. 43, pp. 4899–4908. https://www.tandfonline.com/doi/abs/10.1080/01430750.2021.1927836.
Sandeep Khelge, Vijaya Kumar, Vidyasagar Shetty and Kumaraswamy J, Effect of reinforcement particles on the mechanical and wear properties of aluminium alloy composites: Review, Materials Today: Proceedings, Vol. 52, Part 3, pp. 571-576, 2022. https://doi.org/10.1016/j.matpr.2021.09.525
Sandeep Khelge, Vijaya Kumar and Kumaraswamy J, Optimization of wear properties on aluminum alloy (LM22) hybrid composite, Materials Today: Proceedings, Vol. 52, Part 3, pp. 565--570, 2022. https://doi.org/10.1016/j.matpr.2021.09.518
Vidyasagar Shetty, Shabari Shedthi B and Kumaraswamy J, Predicting the thermodynamic stability of perovskite oxides using multiple machine learning techniques, Materials Today: Proceedings, Vol. 52, Part 3, pp. 457-461, 2022. https://doi.org/10.1016/j.matpr.2021.09.208
Kumaraswamy J, Anil K. C., Vidyasagar Shetty and C Shashishekar. Wear behaviour of the Ni-Cu alloy hybrid composites processed by sand mold casting, Advances in Materials and Processing Technologies (Tylor and Francis), Vol. 2, pp. 1-17. https://doi.org/10.1080/2374068X.2022.2092684
Harish R S, Sreenivasa Reddy M, Kumaraswamy J, Wear characterization of Al7075 Alloy hybrid composites, Journal of Metallurgical and Materials Engineering, Vol. 28 (2), pp. 291-303. https://doi.org/10.30544/821.
K.C. Anil, J. Kumaraswamy, Akash et al., Experimental arrangement for estimation of metal-mold boundary heat flux during gravity chill casting, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.07.399
J. Kumaraswamy et al., "Thermal Analysis of Ni-Cu Alloy Nanocomposites Processed by Sand Mold Casting," Advances in Materials Science and Engineering, vol. 2022, Article ID 2530707, 11 pages, 2022. https://doi.org/10.1155/2022/2530707.
R.S. Harish, M. Sreenivasa Reddy and J. Kumaraswamy, Mechanical behaviour of Al7075 alloy Al2O3/E-Glass hybrid composites for automobile applications, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.08.460
J. Kumaraswamy, K.C. Anil and V. Shetty, Development of Ni-Cu based alloy hybrid composites through induction furnace casting, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.09.215
Anil, K.C., Kumarswamy, J., Reddy, M., Prakash, B., Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue & Graphite Reinforced Aluminium Hybrid Composites, Frattura ed Integrità Strutturale, 16 (62) (2022) 168-179. DOI: 10.3221/IGF-ESIS.62.12
Kumaraswamy Jayappa, Kyathasandra Chikkanna Anil, Zulfiqar A. Khan, Enhancing wear resistance in Al-7075 composites through conventional mixing and casting techniques, Journal of Materials Research and Technology, Volume 27, 2023, pp. 7935-7945, https://doi.org/10.1016/j.jmrt.2023.11.
