Future-Ready Manufacturing : Resource Optimization and Environmental Stewardship in Machining and Production Systems

Authors

  • Sunilkumar N Chaudhari  Mechanical Engineering Department, Bhailalbhai & Bhikhabhai Institute of Technology, Vallabh Vidyanagar, Gujarat, India
  • Amarishkumar J Patel  Mechanical Engineering Department, Bhailalbhai & Bhikhabhai Institute of Technology, Vallabh Vidyanagar, Gujarat, India

Keywords:

Sustainable Manufacturing, Resource Efficiency, Machining Processes, Cooling Techniques

Abstract

Achieving sustainability in manufacturing demands a comprehensive approach that encompasses products, processes, and entire supply chains across multiple product life cycles. This paper delves into the critical need for conserving resources in machining operations, exploring the evolution of sustainable manufacturing, and addressing product-level sustainability challenges. It highlights the importance of resource optimization and environmental stewardship within the manufacturing sector, providing an in-depth analysis of current practices and emerging trends. The study examines the intersection of efficiency and sustainability, offering insights into how manufacturers can minimize resource consumption while maintaining high levels of productivity. Finally, the paper outlines future directions for sustainable manufacturing, emphasizing the potential of innovative technologies and strategic approaches to advance sustainability goals in the industry. This research aims to contribute to the ongoing discourse on sustainable practices, offering practical recommendations for achieving environmental stewardship in machining operations.

References

  1. Pimenov, Danil Yu, et al. "Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects." Renewable and Sustainable Energy Reviews 166 (2022): 112660.
  2. Jayal, A. D., et al. "Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels." CIRP Journal of Manufacturing Science and Technology 2.3 (2010): 144-152.
  3. Jawahir, I. S., and O. W. Dillon Jr. "Sustainable manufacturing processes: new challenges for developing predictive models and optimization techniques." Proceedings of the first international conference on sustainable manufacturing, Montreal, Canada. 2007.
  4. Badurdeen, Fazleena, et al. "Extending total life-cycle thinking to sustainable supply chain design." International Journal of Product Lifecycle Management 4.1-3 (2009): 49-67.
  5. Gupta, Munish Kumar, et al. "A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process." The International Journal of Advanced Manufacturing Technology 117 (2021): 729-750.
  6. Sarikaya, Murat, et al. "Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review." Journal of Manufacturing Processes 62 (2021): 179-201.
  7. Krolczyk, Grzegorz M., et al. "Ecological trends in machining as a key factor in sustainable production–a review." Journal of Cleaner Production 218 (2019): 601-615.
  8. Najiha, M. S., M. M. Rahman, and A. R. Yusoff. "Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review." Renewable and Sustainable Energy Reviews 60 (2016): 1008-1031.
  9. Shokrani, Alborz, Vimal Dhokia, and Stephen T. Newman. "Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232.10 (2018): 1690-1706.
  10. Bilga, Paramjit Singh, Sehijpal Singh, and Raman Kumar. "Optimization of energy consumption response parameters for turning operation using Taguchi method." Journal of cleaner production 137 (2016): 1406-1417.
  11. Zhao, G. Y., et al. "Energy consumption in machining: Classification, prediction, and reduction strategy." Energy 133 (2017): 142-157.
  12. Moradnazhad, Mariyeh, and Hakki Ozgur Unver. "Energy efficiency of machining operations: A review." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231.11 (2017): 1871-1889.
  13. Ic, Yusuf Tansel, et al. "Optimisation of cutting parameters for minimizing carbon emission and maximising cutting quality in turning process." International Journal of Production Research 56.11 (2018): 4035-4055.
  14. Zhou, Guanghui, et al. "Cutting parameter optimization for machining operations considering carbon emissions." Journal of Cleaner Production 208 (2019): 937-950.
  15. Batayneh, Malek, Iqbal Marie, and Ibrahim Asi. "Use of selected waste materials in concrete mixes." Waste management 27.12 (2007): 1870-1876.
  16. Debnath, Sujan, Moola Mohan Reddy, and Qua Sok Yi. "Environmental friendly cutting fluids and cooling techniques in machining: a review." Journal of cleaner production 83 (2014): 33-47.
  17. Jawahir, I. S., and O. W. Dillon Jr. "Sustainable manufacturing processes: new challenges for developing predictive models and optimization techniques." Proceedings of the first international conference on sustainable manufacturing, Montreal, Canada. 2007.
  18. Jaafar, I. H., et al. "Product design for sustainability: a new assessment methodology and case studies." Environmentally conscious mechanical design 5 (2007): 25-65.
  19. National Council for Advanced Manufacturing (NACFAM). 2009, Sustainable Manufacturing, . Available [Online]: http://nacfam02.dev.web.sba.com/PolicyInitiatives/SustainableManufacturing/tabid/64/Default.aspx.
  20. Kaebemick, H., M. Sun, and S. Kara. "Simplified lifecycle assessment for the early design stages of industrial products." CIRP Annals 52.1 (2003): 25-28.
  21. Jaafar, I. H., et al. "Product design for sustainability: a new assessment methodology and case studies." Environmentally conscious mechanical design 5 (2007): 25-65.
  22. De Silva, Niranjali, et al. "A new comprehensive methodology for the evaluation of product sustainability at the design and development stage of consumer electronic products." International Journal of Sustainable Manufacturing 1.3 (2009): 251-264.
  23. Gupta, A., et al. "Priority evaluation of product metrics for sustainable manufacturing." Global Product Development: Proceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th-21st April 2010. Springer Berlin Heidelberg, 2011.
  24. Environmental Evaluation of Machine Tools, International Organization for Standardization, Standard under development, ISO/CD 14955-1.
  25. CECIMO. (2009) Concept Description for CECIMO’s Self-regulatory Initiative (SRI) for the Sector Specific Implementation of the Directive 2005/32/EC. Available [Online]: http://www.ecodesign-info.eu/document-tations/Machi- ne_tools_VA_20Oct09.pdf.
  26. Duflou, Joost R., et al. "Environmental performance of sheet metal working processes." Key Engineering Materials 473 (2011): 21-26.
  27. Wahl, E., Vincke, K., Himmelsbach, M., 2011, Recovery of Energy from a Laser Machining System, US Patent Application publication, US2011/0024401.
  28. Saidur, Rahman, Nasrudin Abdul Rahim, and Md Hasanuzzaman. "A review on compressed-air energy use and energy savings." Renewable and sustainable energy reviews 14.4 (2010): 1135-1153.
  29. Duflou, Joost R., et al. "Towards energy and resource efficient manufacturing: A processes and systems approach." CIRP annals 61.2 (2012): 587-609.
  30. Schmitt, Robert, José Luiz Bittencourt, and Ralf Bonefeld. "Modelling machine tools for self-optimisation of energy consumption." Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Germany, May 2nd-4th, 2011. Springer Berlin Heidelberg, 2011.
  31. Diaz N, Helu M, Jarvis A, To? nissen S, Dornfeld D, Schlosser R. “Strategies for Minimum Energy Operation for Precision Machining.” Proceedings of MTTRF 2009 Annual Meeting.
  32. Diaz, Nancy, et al. "Environmental analysis of milling machine tool use in various manufacturing environments." Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology. IEEE, 2010.
  33. Sheng, Paul, Mukund Srinivasan, and S. Kobayashi. "Multi-objective process planning in environmentally conscious manufacturing: a feature-based approach." CIRP annals 44.1 (1995): 433-437.
  34. Peças, P., et al. "A Life Cycle Engineering model for technology selection: a case study on plastic injection moulds for low production volumes." Journal of Cleaner Production 17.9 (2009): 846-856.
  35. Duflou, Joost R., et al. "Energy related environmental impact reduction opportunities in machine design: case study of a laser cutting machine." International Journal of Sustainable Manufacturing 2.1 (2010): 80-98.
  36. Aurich, J. C., et al. "High-performance dry grinding using a grinding wheel with a defined grain pattern." CIRP annals 57.1 (2008): 357-362.
  37. Klimant, Philipp, et al. "Investigations on digitalization for sustainable machine tools and forming technologies." The International Journal of Advanced Manufacturing Technology 117.7 (2021): 2269-2277.
  38. Stavropoulos, Panagiotis. "Digitization of manufacturing processes: From sensing to twining." Technologies 10.5 (2022): 98.
  39. Singhal, Deepak, Sushanta Tripathy, and Sarat Kumar Jena. "Remanufacturing for the circular economy: Study and evaluation of critical factors." Resources, Conservation and Recycling 156 (2020): 104681.
  40. Corona, Blanca, et al. "Towards sustainable development through the circular economy—A review and critical assessment on current circularity metrics." Resources, Conservation and Recycling 151 (2019): 104498.
  41. Khanna, Navneet, et al. "Life cycle assessment of environmentally friendly initiatives for sustainable machining: A short review of current knowledge and a case study." Sustainable Materials and Technologies 32 (2022): e00413.
  42. Faludi, Jeremy, et al. "Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment." Rapid Prototyping Journal 21.1 (2015): 14-33.
  43. DeBoer, Benjamin, et al. "Additive, subtractive, and formative manufacturing of metal components: a life cycle assessment comparison." The International Journal of Advanced Manufacturing Technology 115.1 (2021): 413-432.
  44. Salem, Amr, Hussien Hegab, and Hossam A. Kishawy. "An integrated approach for sustainable machining processes: Assessment, performance analysis, and optimization." Sustainable Production and Consumption 25 (2021): 450-470.
  45. Chand, Pushpendu, Jitesh J. Thakkar, and Kunal Kanti Ghosh. "Analysis of supply chain sustainability with supply chain complexity, inter-relationship study using delphi and interpretive structural modeling for Indian mining and earthmoving machinery industry." Resources Policy 68 (2020): 101726.
  46. Singh, Gurpreet, Vivek Aggarwal, and Sehijpal Singh. "Critical review on ecological, economical and technological aspects of minimum quantity lubrication towards sustainable machining." Journal of Cleaner Production 271 (2020): 122185.
  47. Sihag, Nitesh, and Kuldip Singh Sangwan. "A systematic literature review on machine tool energy consumption." Journal of Cleaner Production 275 (2020): 123125.
  48.  Luan, Hui, and Chin-Chung Tsai. "A review of using machine learning approaches for precision education." Educational Technology & Society 24.1 (2021): 250-266.

IInternational Journal of Scientific Research in Mechanical and Materials Engineering

Downloads

Published

2023-06-30

Issue

Volume 7, Issue 3, May-June-2023

Section

Research Articles

License

Copyright (c) IJSRMME

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Sunilkumar N Chaudhari, Amarishkumar J Patel, " Future-Ready Manufacturing : Resource Optimization and Environmental Stewardship in Machining and Production Systems, IInternational Journal of Scientific Research in Mechanical and Materials Engineering(IJSRMME), ISSN : 2456-3307, Volume 7, Issue 3, pp.76-90, May-June-2023.