The Material Failure by Von-Mise’s Stress and Resonance Concept

Authors

  • Jitendra Sunte  Assistant Professor, Department of Mechanical Engineering, Lingaraj Appa Engineering College Bidar, Karnataka, India

Keywords:

Musculoskeletal modeling, Finite element analysis, Fracture mechanics, Von-Mises stress, Deformation, Muscle attachment. Random vibration, Monte, F-scan, Insole Stress. Femur, Computed tomography, Deformation

Abstract

The failure of materials for living and non-living materials or organs is predicted by von mises criteria or distortion energy theory. It also aids in organ transplants or replacement depending on the level of stress considered. Usually specimen for living material is skeleton body parts of animal is considered. The software platform utilized is 3d cad,catia v5, fea, hypermesh& ls dyna used. The von mises is applied to metals, alloys, composite materials etc. when the ?von??yield material will fail. The design is considered based on FOS or strain concept. Any material or living organ will fail after resonance, which is warning bell while in operation performing.

References

  1. Cristian wong, john Rasmussen-The influence of muscle forces on the stress distribution in the   lumbar spine. Dec 2011 3(1) 21-26
  2. Jeong-Woo Seo, Jin-Seung Choi, Dong-Won Kang, Jae-Hyuk Bae, Gye-Rae Tack-Differences in Stress and Total Deformation Due to Muscle Attachment to the Femur. Vol:6, No:3, Vol:6, 2012
  3. Mu-Tsang Chena;_ and Ronald Harichandranba  ANSYS Inc., 275 Technology Dr., Canonsburg, PA 15317, USA-Statistics of the von Mises stress response for structures subjected to random excitations. Received 29 January 1997; Revised 8 December 1997
  4. Rezchell Chame Alysion, Solehuddin Shuib, Nur Faiqa Ismail-Effectiveness of Different Insoles on Plantar Pressure Distribution using Finite Element Simulation-ISSN: 2277-3878, Volume-8 Issue-4, November 2019
  5. Deepak Singathia, Dr. M. L. Aggarwal-Finite Element Modeling for Replacement of C.I. Pulley with Suitable Material-Vol. 2, Issue. 5, Sept.-Oct. 2012 pp-3028-3031
  6. K.N. Chethan1, Shyamasunder N. Bhat2, Mohammad Zuber1 and Satish B. Shenoy*,-Patient-Specific Static Structural Analysis of Femur Bone of different lengths DOI: 10.2174 /1874120701812010108, 2018, 12, 108-114
  7. Shrinivas s metan-sensitivity analysis of shoulder joint muscles by using the FEM model-vol 3, no.2(2016)115-127
  8. Filardi ,milardi- experimental strain analysis on the entire bony leg compared with FE analysis-01 nov 2016,14(1)115-122
  9. C.U. Ugochukwu1*, O.O. Oluwole1, K.M. Odunfa1-Finite Element Analysis of Displacement and Von-Mises Stress in Cylindrical Liquified Petroleum Gas Pressure Tank-Covenant Journal of Engineering Technology (CJET) Vol. 1, No. 2, Sept. 2018
  10. Osama A. Terfas*, Arwa M. Elambrouk, Ahlam Y. Elraqiq- Analysis of the Failure of Cylindrical Pressure Vessels-Terfas et al., CEST-2018, AIJR Proceedings 4, pp.571-580, 2018
  11. R. Siva Prasad , P. Palanivelu-A Paper on Design and Analysis of PressureVessel-international Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 IJERTV6IS060424 (vol. 6 Issue 06, June - 2017

IInternational Journal of Scientific Research in Mechanical and Materials Engineering

Downloads

Published

2022-07-25

Issue

Volume 6, Issue 4, July-August-2022

Section

Research Articles

License

Copyright (c) IJSRMME

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Jitendra Sunte, " The Material Failure by Von-Mise’s Stress and Resonance Concept, IInternational Journal of Scientific Research in Mechanical and Materials Engineering(IJSRMME), ISSN : 2456-3307, Volume 6, Issue 4, pp.44-51, July-August-2022.