A Review on Using Design of Experiments to Optimize Machining Parameters in Turning Operation

Authors

  • Deepak Kumar Verma  RSR Rungta College of Engineering and Technology Bhilai, Chhattisgarh, India
  • Rupendra Kumar Marre  RSR Rungta College of Engineering and Technology Bhilai, Chhattisgarh, India
  • Lokesh Singh  RSR Rungta College of Engineering and Technology Bhilai, Chhattisgarh, India

Keywords:

Turning, Cutting, Metallurgical, Machining, Surface Roughness

Abstract

Most industrial applications of machining are in metals. Turning is a process of machining to create external surfaces of rotation by means of a cutting tool on a rotating part, usually in a lathe. Lathe is a machine that rotates the workpiece on its axis for various operations such as cutting, knurling, drilling, threading, etc. with tools that are applied to the workpiece, to create an object that has symmetry around the axis rotation. Aluminum alloys can be processed quickly and economically due of their metallurgical structure. In the present study investigated the influence of all cutting parameters, such as feed rate, cutting speed, cutting depth, tool radius and angle of rotation on machinability factors when aluminium alloys. The purpose is to study the machining parameters and effect of them on surface roughness. In this paper, we study many good numbers of published papers and a literature review has been presented to identify and mention the gap for further research.

References

  1. R. Davis and V. Singh , ‘Optimization of process parameters of Turning operation of EN 24 steel using Taguchi Design of experiment method’, Proceeding of the world congress on engineering 2014 Vol II.
  2. S.V. Alagarsamy and P. Raveendran, ‘Optimization of machining parameters for turning of aluminium alloy 7075 using Taguchi method’, International Research Journal of engineering and Technology, Jan-2016 Vol: 03 Issue: 01.
  3. A. Saravanakumar and P. Sasikumar, ‘Optimization of machining Parameters using Taguchi Method for Surface Roughness’, J. Mater. Environ. Sci.7(5) 2016.
  4. Md Nasimuddin and Noor Zaman Khan, ‘Optimization of turning parameters using Taguchi method’, International Journal of scientific & Engineering Research Volume 8, Issue 7, July 2017.
  5. Rifat Ahsan Siddique and Farhana Dilwar, ‘Optimization of Machining Parameters in Turning AISI 304 Using Taguchi Method and Principal component analysis’, International Journal of Scientific & Engineering Research, Volume 9, Issue 7, June-2018.
  6. P. Chenneswari and N. Sateesh, ‘Optimization of machining process parameters in Al 7175 metal matrix composites using Taguchi method’, Material Today: Science Direct, July 2020.
  7. T. Malayadrib and N. Srilatha, ‘Optimization of Turning Parameters on surface Roughness Based on Taguchi Technique’, Material Today: Science Direct, 18(2019).
  8. M. Kanade, ‘Parameter optimization of Turning Process(Cast Iron) Using Taguchi Method’, International Journal of Engineering Research & Technology(IJERT), Vol. 3 Issue 4, April-2014.
  9. Shashi Kiran G., ‘ Machinability Studies on Copper Based Alloy –optimization of Control Parameters in Turning Operation using Taguchi Method’, International Journal of Engineering Research & Technology(IJERT), Vol. 2 Issue 7, April-2013.
  10. Sharda R. Nayse and M. G. Rathi, ‘Optimization of Turning Parameters Using Taguchi Method’, International Journal of Modern Engineering Research (IJMER), Vol 4 Issue 11, Nov. 2014.
  11. Ranganath M S and Vipin, ‘Optimization of Process Parameters in Turning Operation Using Taguchi Method and Anova: A Review’, International Journal of Advance Research and Innovation, Volume 1 Issue 1(2013) 31-45.
  12. Madhav Murthy and R. Suresh Kumar, ‘ Optimization Of Machinability Parameters of Al6061 using Taguchi Technique’, International Journal of Current Engineering and Technology, Special Issue 3, April 2014.
  13. M. Adinarayana Raju and Y. Naveen Chandra, ‘Optimization of Turning Process Parameters for AISI4340 Steel Using Taguchi Method’, International Research Journal of Engineering and Technology (IRJET), Volume 7 Issue 9 Aug. 2020.
  14. D. Kumar and Kulbhushan Sharma, ‘Optimization of CNC Turning Parameters for surface roughness by using Taguchi Method on EN-24’, International Journal of Mechanical and Production Engineering, Volume-4, Issue-8, Aug. 2016.
  15. Soni Jaiswal and Madhurkar B. Sorte, ‘An optimization OF Turning Process Parameters for surface Roughness for SS 316L material by using Taguchi Method: A Review’, International Journal of Scientific & Engineering Research, Volume 9, Issue 5, May 2018.
  16. L B Abhang and M. Hameedullah, ‘Optimization of Machining Parameters in steel Turning Operation by Taguchi Method, International Conference on Modeling, Optimization and Computing, Procedia Engineering 38(2012) 40-48.
  17. Singh H and Kumar P, “Optimizing feed force for turned parts through the taguchi technique.” Volume 31, Number 6, 2006, pp 671-681.
  18. Narayan B. and S Puneeth, “Optimization of cutting Parameters using Signal to Noise Ratio for Turning Aluminium Alloy Al7050.” International Journal of Ignited Minds, Volume 01, Issue 09, pp 1-6, Sept. 2014.
  19. Sahoo P., Barman T. K, “Taguchi based practical dimension modeling and optimization in CNC turning.’’ Advance in Production Engineering and Management, Volume 3, 2008. 205-217.
  20. Jitendra Verma and Pankaj Agrawal, “ Turning parameter optimization for surface roughness of alloys steel by taguchi method.” International Journal of Advances in Engineering & Technology, 2012. pp 255-261.
  21. D.I. Lalwani and P. K. Jain,“Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning.” Journal of materials processing technology.” 2008.
  22. S. kosaraju and B.B Popuri, “Taguchi analysis on Cutting forces and temperature in turning Titanium Ti-6Al-4V.” International journal of mechanical and industrial engineering. Vol. 1, issue 4, 2012, pp 55-59.
  23. E. Daniel, “A parameter design study in a turning operation using the Taguchi method.” The technology interface, 2006.
  24. Wang M. Y. and Lan T. S., “ Parametric optimization on multi-objective precision turning using grey relational analysis.” Information technology jounal, volume 7, 2008.pp 1072-1076.
  25. Thandra S. K. and Choudhury S. K., “ Effect of cutting parameters on cutting force, surface finish.” Journal of Machining and Machinability of Material. Vol. 7, 2010, pp 260-273.
  26. L B Abhang, M Hameedullah, “Optimization of Machining Parameters in Steel Turning Operation by Taguchi Method.” International Conference on Mdeling, Optimization and computing.SciVerse ScienceDirect Procedia Engineering 38(2012) 40-48.
  27. Arun Kumar Parida, Tapas Kumar Moharana, “Optimization of machining parameters in turning using Design of Experiments(DOE) and Analysis of Variance.” Int. J. Adv. Res. Sci. Technol. Volume 1, Issue1, Oct-2012, pp 30-34.
  28. P. Pothys, R. Selvam, A. Senthil Kumar, “Evaluation of Optimal Machining Parameters for turning by using Genetic Algorithm.” Internationa Journal of Engineering Rsearch & Tecnology(IJERT). Special Issue-2018, ISSN:2278-0181.
  29. Akshay Bhat, Ashutosh Jha, “Optimization of Machining Parameters in Turning Operation of EN13 Steel using Response Surface Methodology.” International Journal of Engineering Technology, Management and Applied Sciences. March 2015, Volume 3 special Issue, ISSN 2349-4476.
  30. Paramjit Singh Bilga, Sehijpal Singh, “Optimization of Energy consumption response parameters for turning operation using Taguchi method.” Journal of Cleaner Production(2016), S0959-6526(16)31125-8.
  31. Jino Joy Thomas, Vishnu Prasad, “ Multi Objective Optimization and Comparission of Process Parameters in Turning Operation.” Internationa Journal of Engineering Research & Technology, Vol. 6 Issue06, June-2017. ISSN: 2278-0181.Pankaj Biswas, P. Mahanta; Influence of welding current on bead profile and mechanical Properties of double sided submerged arc welding of AISI 304 austenitic stainless steel; Science Direct, Materials Today: Proceedings.
  32. Pankaj Sharma, Sachin Mohal; Parametric Optimization of Submerged Arc Welding Process Parameters by Response Surface Methodology; Material Today: Proceeding 24(2020) 673-682.

IInternational Journal of Scientific Research in Mechanical and Materials Engineering

Downloads

Published

2022-03-05

Issue

Volume 6, Issue 2, March-April-2022

Section

Research Articles

License

Copyright (c) IJSRMME

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Deepak Kumar Verma, Rupendra Kumar Marre, Lokesh Singh, " A Review on Using Design of Experiments to Optimize Machining Parameters in Turning Operation, IInternational Journal of Scientific Research in Mechanical and Materials Engineering(IJSRMME), ISSN : 2456-3307, Volume 6, Issue 2, pp.27-33, March-April-2022.